Z-Score Calculator: Find Any Z-Score in Seconds
A test score of 130 means little on its own. What matters is how far that score sits from the average and how that difference is measured. A score that is 2 standard deviations above the mean is strong on any test, whether the raw marks are 80, 130, or 250. A z-score calculator helps put a raw score into context by showing how many standard deviations it falls above or below the mean.
This z-score calculator includes six modes: Find the Z-Score, Find the Raw Score, Find the Mean or the SD, Percentile to Z and X, Compare Two Z-Scores, and Z-Scores of a Data Set. Students also search for a standard score calculator when they mean this same tool. This page is the general z-score tool for a single value, a missing mean or standard deviation, a percentile, a side-by-side comparison, and a whole data set, none of which the Mean Calculator does.
Z-Score Calculator
Find a z-score, a raw score, a missing mean or standard deviation, a percentile, or compare two scores.
| Value | Deviation (x − mean) | Z-score | Percentile |
|---|
Using the Z-Score Calculator
This z-score calculator has six modes, and each one solves a different type of problem.
1. Find the Z-Score
Enter a value, a mean, and a standard deviation to calculate how far the value sits from the average. For students who want more than the z-score itself, a z score probability calculator can show the probability that a random value falls below the given value, as well as the percentile, the right-tail probability, the two-tailed p-value, the middle area, and the T-score. For example, with x=130, a mean of 100, and a standard deviation of 15, the z-score is 2, the 97.73rd percentile, the right-tail probability is 2.27%, the two-tailed p-value is 4.55%, the middle area is 95.45%, and the T-score is 70.
2. Find the Raw Score
Enter a z-score, a mean, and a standard deviation, and the tool returns the original raw score. It reverses the standard z-score calculation. For example, a z-score of 1.5, a mean of 75, and a standard deviation of 10 gives a raw score of 90.
3. Find the Mean or the SD
Choose whether you want to solve for the mean or the standard deviation. Then enter the other three values, and the tool calculates the missing one. For example, with x=85, z=1, and SD=10, the mean is 75; with x=85, z=1, and mean=75, the standard deviation is 10.
4. Percentile to Z and X
Enter a percentile, a mean, and a standard deviation to find both the z-score and the raw score that match the percentile. For a given percentile, the percentile to z-score conversion helps you find the matching z-score first, and the raw score follows from that. For example, the 95th percentile, with a mean of 100 and a standard deviation of 15, gives z=1.6449 and x=124.67.
5. Compare Two Z-Scores
Enter two scores side by side, with a mean and a standard deviation for each. The tool returns the z-score and the percentile for each one, and says which performance is stronger and by how much. For example, Exam 1: 91 (mean 79, SD 8) gives z=1.5, and Exam 2: 78 (mean 60, SD 12) gives z=1.5. Because both z-scores are the same, the result is a tie.
6. Z-Scores of a Data Set
Paste a list of numbers, and choose either the sample or the population standard deviation. The tool shows the mean, the standard deviation, and a z-score for every value in the list. For the list 4, 8, 6, 5, 12, the mean is 7, the sample standard deviation is 3.1623, and the population standard deviation is 2.8284.
| Mode | What you enter | What you get |
|---|---|---|
| Find the Z-Score | A value, a mean, and a standard deviation | The z-score, the left-tail probability, the percentile, the right tail, the two-tailed p-value, the middle area, and the T-score |
| Find the Raw Score | A z-score, a mean, and a standard deviation | The raw score |
| Find the Mean or the SD | A value, a z-score, and either the mean or the standard deviation | The missing mean or standard deviation |
| Percentile to Z and X | A percentile, a mean, and a standard deviation | The z-score and the raw score |
| Compare Two Z-Scores | Two scores, with a mean and a standard deviation for each | Each z-score and percentile, and which performance is stronger |
| Z-Scores of a Data Set | A list of values, plus a choice of sample or population standard deviation | The mean, the standard deviation, and a z-score for every value |
The following examples show the default result for each mode.
| Mode | Example | Result |
|---|---|---|
| Find the Z-Score | x=130, mean 100, SD 15 | z = 2, 97.73rd percentile |
| Find the Raw Score | z=1.5, mean 75, SD 10 | x = 90 |
| Find the Mean or the SD | x=85, z=1, SD 10 | mean 75 |
| Percentile to Z and X | 95th percentile, mean 100, SD 15 | z = 1.6449, x = 124.67 |
| Compare Two Z-Scores | 91 vs 78 | tie, both z = 1.5 |
| Z-Scores of a Data Set | 4, 8, 6, 5, 12 | mean 7, sample SD 3.1623 |
About Z-Scores
A z-score tells you how many standard deviations a value sits from the mean. A positive z-score means the value is above the mean, a negative z-score means it is below the mean, and a z-score of 0 means the value is exactly equal to the mean. The formula needs the mean of a list, so find that first, then subtract it from the value and divide by the standard deviation.
The Mean Calculator finds the average of a list; this page takes that average and the standard deviation and turns any value into a z-score, a percentile and, going the other way, a raw score.
Z-scores are unitless, so they can be used to compare values from different measurement scales. A test score and a height can be compared once both have been converted to z-scores. A z-score is also called a standard score.
The Formula
This section shows how to calculate z-score values, step by step. The z-score formula is simple: subtract the mean from the value, then divide by the standard deviation.
z = (x − μ) ÷ σ
Here, z is the z-score, x is the value, μ is the mean, and σ is the standard deviation.
For example, if x=130, the mean is 100, and the standard deviation is 15, first subtract the mean from the value: 130 − 100 = 30. Then divide by the standard deviation: 30 ÷ 15 = 2. So z = 2.
| Solve for | Formula | Example |
|---|---|---|
| z | z = (x − μ) ÷ σ | x=130, mean 100, SD 15 gives z = 2 |
| x | x = μ + zσ | z=1.5, mean 75, SD 10 gives x = 90 |
| μ or σ | μ = x − zσ, σ = (x − μ) ÷ z | x=85, z=1, SD 10 gives mean 75; x=85, z=1, mean 75 gives SD 10 |
One important rule: The standard deviation is always positive, and dividing by zero is not allowed. If the SD is 0, every value equals the mean, and there is no z-score to find.
Reading a Z-Score
A z-score tells you where a value sits in a normal distribution. To understand its probability, start with Φ(z), the share of values below the z-score. Multiply it by 100 to get the percentile. For example, a z-score of 2 gives Φ(2) = 0.97725. That means the value is at approximately the 97.73rd percentile, with 2.27% of values above it. A z-score of −1 gives Φ(−1) = 0.15866. This places the value at the 15.87th percentile. A z-score to percentile conversion helps translate a z-score into its position in the full distribution.
Understanding the Other Areas
The left tail is not the only probability you may need. A z-score calculator can also show the areas on the other side of the curve.
- Right tail: The share of values above the z-score. 1 − Φ(z)
- Two-tailed p-value: The combined probability in both tails beyond the positive and negative versions of the z-score. 2 × (1 − Φ(|z|))
- Middle area: The share of values between −|z| and +|z|. 2Φ(|z|) − 1
For z = 2, these areas are:
| Measure | Result |
|---|---|
| Right tail | 0.02275 |
| Two-tailed p-value | 0.0455 |
| Middle area | 0.9545 |
Watch Out for the 0-to-z Table
Not every table reports the cumulative area from the far left up to a z-score. Some tables show only the area between 0 and z, not the left tail. For z = 1.12:
- Area from 0 to 1.12 = 0.36864
- Left-tail probability, Φ(1.12) = 0.86864
These numbers are different because the second includes the entire area to the left of zero as well. Always check which area a table gives before reading a percentile off it.
Z-Score Percentile Table
The following z-score table shows the approximate percentile associated with common z-scores. Use it to convert a z-score into a percentile quickly.
| z | Percentile |
|---|---|
| −3 | 0.13% |
| −2.5 | 0.62% |
| −2 | 2.28% |
| −1.5 | 6.68% |
| −1 | 15.87% |
| −0.5 | 30.85% |
| 0 | 50% |
| 0.5 | 69.15% |
| 1 | 84.13% |
| 1.5 | 93.32% |
| 2 | 97.73% |
| 2.5 | 99.38% |
| 3 | 99.87% |
Critical Z-Values for Common Confidence Levels
Critical z-values are used in hypothesis testing and confidence intervals. The two-tailed column splits the rejection area between the two tails, while the one-tailed column puts it all in one tail.
| Confidence level | Two-tailed z | One-tailed z |
|---|---|---|
| 80% | 1.2816 | 0.8416 |
| 90% | 1.6449 | 1.2816 |
| 95% | 1.96 | 1.6449 |
| 98% | 2.3263 | 2.0537 |
| 99% | 2.5758 | 2.3263 |
| 99.9% | 3.2905 | 3.0902 |
An important distinction about 1.645: A z-score of 1.645 corresponds to approximately the 95th percentile, Φ(1.645) = 0.95002. It is NOT the 90th percentile. The 90th percentile corresponds to z = 1.2816. The confusion comes from two different uses of percentages. A z-score of 1.645 is also the critical value for 90% confidence, two-tailed, but that is a different thing from the 90th percentile.
Finding a Raw Score
This section shows how to find a raw score from z-score values, going the other way. A z-score tells you how many standard deviations a value sits from the mean. To reverse the process, take the mean and add that many standard deviations: x = μ + zσ. Here, x is the raw score, μ is the mean, z is the z-score, and σ is the standard deviation. The z-score calculator uses this rearranged formula to find the original score.
Example 1: Find the Raw Score
Suppose you know: Z-score = 1.5, Mean = 75, Standard deviation = 10. Substitute the values into the formula: x = 75 + 1.5 × 10, x = 75 + 15, x = 90. The raw score is 90, which sits 1.5 standard deviations above the mean.
Example 2: Find the Mean
Suppose the raw score is 85, the z-score is 1, and the standard deviation is 10. Rearrange the formula to isolate the mean: μ = x − zσ. Substitute the known values: μ = 85 − 1 × 10, μ = 75. The mean is 75.
Example 3: Find the Standard Deviation
Suppose the raw score is 85, the z-score is 1, and the mean is 75. Rearrange the formula to isolate the standard deviation: σ = (x − μ) ÷ z. Substitute the values: σ = (85 − 75) ÷ 1, σ = 10. The standard deviation is 10.
Important rule: Solving for the standard deviation requires z ≠ 0. If the z-score is 0, the value equals the mean, regardless of the standard deviation. Therefore, the standard deviation cannot be recovered from that one value alone.
Comparing Two Z-Scores
Raw scores from different tests cannot always be compared directly because the tests may have different means and different spreads. A z-score calculator makes this comparison easier by converting each score to the same scale, so you can compare the z-scores directly.
Example 1: Comparing Two Exam Scores
Suppose two students take different exams: Exam 1: Score = 91, Mean = 79, Standard deviation = 8. z1 = (91 − 79) ÷ 8 = 12 ÷ 8 = 1.5. Exam 2: Score = 78, Mean = 60, Standard deviation = 12. z2 = (78 − 60) ÷ 12 = 18 ÷ 12 = 1.5. Both exams produce the same z-score. Tie. Both performances are equal relative to their respective groups. Each score is 1.5 standard deviations above its mean.
Example 2: Comparing Three Students in Two Subjects
Suppose three students receive scores in Physics and Chemistry. The subject averages and standard deviations are:
| Subject | Mean | Standard deviation |
|---|---|---|
| Physics | 50 | 20 |
| Chemistry | 20 | 5 |
After converting each student's scores into z-scores and finding their average across both subjects:
| Student | Mean z-score |
|---|---|
| Rekha | +0.10 |
| Reshma | +0.40 |
| Sameer | −0.20 |
Reshma performs best overall, with the highest mean z-score of +0.40. Rekha is next at +0.10, while Sameer is lowest at −0.20. The raw scores cannot be compared directly across Physics and Chemistry because the two subjects have different means and different standard deviations.
Example 3: Comparing an SAT Score with Height
Z-scores can also compare measurements that use completely different units. Consider an SAT score of 650 and a height of 190 cm. SAT score: Score = 650, Mean = 500, Standard deviation = 100. z = (650 − 500) ÷ 100 = 1.5. This corresponds to approximately the 93.32nd percentile. Height: Height = 190 cm, Mean = 175 cm, Standard deviation = 6 cm. z = (190 − 175) ÷ 6 = 2.5. This corresponds to approximately the 99.38th percentile.
| Measurement | Raw value | Z-score | Percentile |
|---|---|---|---|
| SAT | 650 | 1.5 | 93.32nd |
| Height | 190 cm | 2.5 | 99.38th |
The height is further above its mean by 1.0 z-score unit, even though 650 is a bigger raw number than 190.
Z-Scores of a Data Set
Instead of calculating one value at a time, you can paste an entire list into the z-score calculator. The tool finds the mean and standard deviation of the list, then standardises every value by showing how far it sits from the mean in standard deviation units. A z distribution calculator shows the z-score of every value in the list, so you can see which values are ordinary and which are unusual.
Example: Calculate Z-Scores for a List
Suppose your data set contains these five values: 4, 8, 6, 5, 12. The mean is: x̄ = (4 + 8 + 6 + 5 + 12) ÷ 5 = 7. The standard deviation depends on whether you treat the list as a sample or an entire population.
| Measure | Standard deviation |
|---|---|
| Sample SD | 3.1623 |
| Population SD | 2.8284 |
Using the mean of 7, the tool calculates a separate z-score for every value.
Using the sample standard deviation:
| Value | Z-score |
|---|---|
| 4 | −0.9487 |
| 8 | 0.3162 |
| 6 | −0.3162 |
| 5 | −0.6325 |
| 12 | 1.5811 |
Using the population standard deviation:
| Value | Z-score |
|---|---|
| 4 | −1.0607 |
| 8 | 0.3536 |
| 6 | −0.3536 |
| 5 | −0.7071 |
| 12 | 1.7678 |
The same list produces different z-scores because the two standard deviation methods use different denominators.
Sample vs. Population Standard Deviation
The choice depends on what your data represents:
- Sample standard deviation: Divides the sum of squared deviations by n − 1 before taking the square root. Use it when your list represents a sample from a larger population.
- Population standard deviation: Divides the sum of squared deviations by n before taking the square root. Use it when your list contains the entire population being studied.
The sample SD is generally larger than the population SD for the same list. That is why the corresponding z-scores are smaller in size. Always say which one you used.
Standard Deviation Is the Square Root of Variance
One important detail can change every result: the standard deviation is the SQUARE ROOT of the variance. Consider these scores: 50, 53, 62, 70. Step 1: Find the mean. x̄ = (50 + 53 + 62 + 70) ÷ 4 = 58.75. Step 2: Calculate the variance. Variance = 61.6875. Step 3: Take the square root to find the standard deviation. SD = √61.6875 = 7.854. Step 4: Calculate the z-score for x = 62. z = (62 − 58.75) ÷ 7.854, z = 0.4138. The score of 62 is approximately 0.4138 standard deviations above the mean. Do not skip the square root. A formula without the square root gives the variance (61.6875), not the standard deviation, and every z-score from it would be wrong.
The Empirical Rule and the Properties of Z-Scores
In a bell-shaped distribution, values spread around the mean in a fixed pattern. Most values cluster near the centre, and fewer values appear as you move away from it.
How Values Spread Around the Mean
| Range | Share of values |
|---|---|
| mean ± 1 SD | 68.27% |
| mean ± 2 SD | 95.45% |
| mean ± 3 SD | 99.73% |
Example: Exam Scores
Suppose an exam has a mean score of 76 and a standard deviation of 9. The expected score ranges are:
- Within 1 standard deviation: About 68% of scores fall between 67 and 85.
- Within 2 standard deviations: About 95% fall between 58 and 94.
- Within 3 standard deviations: About 99.7% fall between 49 and 103.
Now suppose a student scores 100. Using a z-score calculator: z = (100 − 76) ÷ 9 = 2.67. The score is approximately 2.67 standard deviations above the mean. Only about 0.38% of scores are expected to be above it.
Properties of Standard Scores
Standard scores have several useful properties:
- Mean of 0: After standardization, the average z-score is always 0.
- Standard deviation of 1: The spread of standardized values is measured in units of one standard deviation, so the standard deviation of the z-scores is 1.
- No units: Z-scores are unitless, so values from different measurement scales can be compared.
- No fixed limits: Z-scores can be positive or negative and have no fixed minimum or maximum. However, about 95% of values in a normal distribution fall within ±2 standard deviations, and about 99.7% fall within ±3.
- Not always positive: A positive z-score is above the mean, a negative z-score is below it, and zero represents the mean itself.
What Is a T-Score?
A T-score is another way to express a standardized result. Instead of using a mean of 0 and a standard deviation of 1, T-scores use a mean of 50 and a standard deviation of 10. The conversion formula is: T = 50 + 10z. For example: If z = 1.5, then T = 50 + 10(1.5) = 65. If z = −1, then T = 50 + 10(−1) = 40.
A T-score of 65 is above the T-score average, while 40 is below it. Both express the same relative position.
Z-Scores in Real Life
A z-score calculator can help interpret results in exams, measurements, entrance tests, and research samples.
1. Exam Scores
A student scores 100 on an exam with a mean of 76 and a standard deviation of 9. The z-score is 2.67, which means the score is 2.67 standard deviations above the mean. Only about 0.38% of scores are higher. The score stands out clearly from the rest of the group.
2. Heights
Suppose a man's height is 65.6 inches, while the mean height is 69 inches and the standard deviation is 2.8 inches. His z-score is (65.6 − 69) ÷ 2.8 = −1.21. The negative value means he is 1.21 standard deviations below the mean height.
3. Entrance Exams
Imagine 2,000 applicants take an entrance exam with a mean score of 220 and a standard deviation of 15. The proportion of applicants scoring between 200 and 220 is 0.4088, which is about 818 applicants. A score of 220 is the mean, so half of the applicants, 1,000 of them, score below 220.
4. Z-Scores for a Sample Mean
The mean SAT score is 1,051, with a standard deviation of 211. For a sample of 60 students, the standard error is 211 ÷ √60 = 27.24. Sample means of 986 and 1,050 give z-scores of −2.39 and −0.04, respectively, and the proportion between them is about 0.48. To calculate a z-score for a sample mean, use: z = (sample mean − population mean) ÷ (SD ÷ √n). Here, n is the sample size, and the denominator is the standard error. The calculator does not compute sample-mean z-scores in version 1. The formula is taught here so you can calculate it by hand.
What the Calculator Does Not Solve
In version 1, this z-score calculator does not compute a sample-mean z-score using the standard error, although the formula is shown in this article. It does not calculate the Altman bankruptcy score, which is a different concept with the same name. It does not run t-distribution inference, draw a bell curve, or save or share results.
Why Your Results May Differ
If your z-score calculator gives a different result from another tool, it is usually because of one of these six common reasons.
- Dividing by the variance instead of the standard deviation: The standard deviation needs the square root. 61.6875 is the variance, and 7.854 is the standard deviation.
- Reading a 0-to-z table as if it were a left-tail table: For z = 1.12, the 0-to-z area is 0.36864, while the left-tail probability Φ(1.12) is 0.86864.
- Treating 1.645 as the 90th percentile: 1.645 is the z-score for the 95th percentile, not the 90th. The 90th percentile is 1.2816. 1.645 is the z-score for 90% confidence, two-tailed, which is a different thing.
- Mixing up the sample and population standard deviation: The sample SD divides by n − 1, and the population SD divides by n. The same list gives different z-scores depending on which one you use.
- Calling a sample z-score a t-score: A z-score and a t-score are different statistics. The t-distribution is used for small-sample inference, not for standardising a value.
- Comparing raw scores from different scales without standardising first: Scores from different tests, subjects, or measurements cannot be compared directly until each one is turned into a z-score.
Questions Students Ask While Solving
What is the z-score when Hari scores 76, the class mean is 68, and the standard deviation is 5? To find it, subtract the mean from the score and divide the result by the standard deviation: (76 − 68) ÷ 5 = 1.6. Hari sits 1.6 standard deviations above the class mean.
Tamika's standardised score is −1.34, the test mean is 35.44, and the standard deviation is 8.66. What is her test score? Use the rearranged formula x = μ + zσ. Substituting the values gives x = 35.44 + (−1.34)(8.66) = 23.84. Her test score is 23.84.
Exam 1: 91 out of 100, mean 79, standard deviation 8. Exam 2: mean 60, standard deviation 12. What score on Exam 2 equals the Exam 1 performance? First, find the z-score for Exam 1: z = (91 − 79) ÷ 8 = 1.5. Then, apply the same z-score to Exam 2: x = 60 + 1.5 × 12 = 78. A score of 78 on Exam 2 matches the Exam 1 performance.
A self-esteem test has a population mean of 50 and a standard deviation of 5. A sample of 25 students scores a mean of 53. What is the z-score for this sample? The standard error is σ ÷ √n = 5 ÷ √25 = 1. The z-score is z = (53 − 50) ÷ 1 = 3. The sample mean sits 3 standard errors above the population mean.
FAQs
These questions cover the six modes this z-score calculator supports and the traps students meet most often.
Final Thought
A z-score turns any value into a distance from the mean, measured in standard deviations: subtract, divide, and check the percentile. Use this z-score calculator to check your work, keep the traps in mind, and the next z-score will take less time.
