Weighted Average Calculator: Find Any Weighted Average in Seconds
A student with a homework worth 30%, a midterm worth 20%, and a final worth 50% cannot find their overall score by adding the three scores and dividing by 3. Each score counts differently, so a simple average gives the wrong answer. A weighted average calculator takes the weight of each score into account, so the result reflects how much each score actually matters.
This tool offers five modes: Weighted Average, Grades and Percentages, Find a Missing Weight, Find a Missing Value, and Compare Two Weighted Averages. Whether you need to combine scores, calculate a weighted grade, work out an unknown percentage, or compare two sets of results, you can use the appropriate mode. Students also search for a weighted mean calculator when they mean this same tool. This page is the general weighted-average tool for percent grade weights, a missing weight or a missing score, and a side-by-side comparison, none of which the Mean Calculator’s Weighted mode does. A weighted average calculator makes each step clear, so you can see how the result was calculated.
Weighted Average Calculator
Work out a weighted average, a grade with percent weights, a missing weight, a missing score, or compare two plans.
Contribution of each item
| Value | Weight | Value × Weight | Share |
|---|
Plan A
Plan B
Using the Weighted Average Calculator
This weighted average calculator has five modes, and each solves a different kind of problem.
1. Weighted Average
Enter your values and weights in any scale, such as decimals, percentages, counts, or dollars. The tool returns the weighted average, the simple average, the gap between them, the total weight, and a per-item contribution table. If the value and weight lists do not match, it shows an error instead of giving a silent answer. For the default example, 85×0.2 + 90×0.3 + 78×0.5 = 83, while the simple average is 84.33.
2. Grades and Percentages
Enter your scores with their percent weights. The tool warns you when the weights do not add to 100 and names the missing weight. This mode acts as a grading calculator with weights, so you can check how each assessment contributes to your final grade. For the default example, HW 88×30, Mid 92×20, Final 76×50 = 82.8.
3. Find a Missing Weight
Enter a target average, your known value and weight pairs, and the value whose weight is unknown. The tool solves for the missing weight. Default example: target 80, known 80×0.4 and 70×0.3, unknown value 90, weight 0.3.
4. Find a Missing Value
Enter a target average, your known value and weight pairs, and the weight of the remaining item. The tool works out the score needed and says whether the target is reachable, already locked in, or unreachable. If you searched for a work out average calculator to find a missing score, this mode gives you the exact value required. Default example: known 80×0.2 and 90×0.3, remaining weight 0.5, target 85, needed score 84.
5. Compare Two Weighted Averages
Enter two sets side by side. The tool returns each weighted average and tells you which is higher and by how much. Default example: Plan A 83 vs Plan B 86.3, Plan B higher by 3.3.
| Mode | What you enter | What you get |
|---|---|---|
| Weighted Average | Values and weights in any scale | Weighted average, simple average, gap, total weight, per-item contribution table |
| Grades and Percentages | Scores with percent weights | Weighted grade, warning and missing weight if the weights do not add to 100 |
| Find a Missing Weight | Target average, known value and weight pairs, value with unknown weight | The missing weight |
| Find a Missing Value | Target average, known pairs, weight of the remaining item | Score needed, and whether the target is reachable, already locked in, or unreachable |
| Compare Two Weighted Averages | Two sets side by side | Each weighted average, which is higher, and by how much |
The following examples show the default result for each mode, plus one grouped-data example. The same kinds of inputs work in every mode, often with counts instead of percentages.
| Mode | Example | Result |
|---|---|---|
| Weighted Average | 85×0.2 + 90×0.3 + 78×0.5 | 83 |
| Grades and Percentages | 88×30 + 92×20 + 76×50 | 82.8 |
| Find a Missing Weight | target 80, 80×0.4 + 70×0.3, value 90 | weight 0.3 |
| Find a Missing Value | 80×0.2 + 90×0.3, remaining weight 0.5, target 85 | 84 |
| Compare Two Weighted Averages | Plan A 83 vs Plan B 86.3 | Plan B higher by 3.3 |
| Grouped data | stores 4.2×500 + 3.8×90 + 4.6×40 | 4.168 |
About Weighted Averages
A weighted average is calculated by multiplying each value by its weight, adding the products, and dividing the total by the total weight. A weighted average is also called a weighted mean. It is useful when some values matter more than others. You can use it to combine scores, prices, or other numbers where each one has a different level of importance.
The Mean Calculator's Weighted mode handles a quick weighted mean of a plain list; this page is the general weighted-average tool for percent grade weights, a missing weight or a missing score, and a side-by-side comparison.
Weights represent relative importance, not absolute quantities. Only the ratios matter. Weights of 2, 3, 5 give the identical answer to 0.2, 0.3, 0.5 and to 20, 30, 50. In short, a weighted calculator multiplies each value by its importance before averaging. A weight of zero excludes that value from the calculation. If all weights are zero, the average is undefined because there is nothing to divide by.
The Formula
This section shows how to calculate weighted average values, step by step.
The weighted average formula is simple: multiply each value by its weight, add the products, and divide by the total weight.
weighted average = (value1 × weight1 + value2 × weight2 + ...) ÷ (weight1 + weight2 + ...)
Work the example 85×0.2 + 90×0.3 + 78×0.5 step by step. First, multiply each value by its weight: 85×0.2 = 17, 90×0.3 = 27, and 78×0.5 = 39. Next, add the products: 17 + 27 + 39 = 83. The total weight is 0.2 + 0.3 + 0.5 = 1, so 83 ÷ 1 = 83. A weighted average calculator applies this same formula, so you can check the result by hand if you want to.
| Weight form | Example | Divide by |
|---|---|---|
| decimals that add to 1 | 0.2, 0.3, 0.5 | 1 |
| percentages that add to 100 | 20, 30, 50 | 100 |
| counts or raw numbers | 2, 3, 5 | 9 (their total) |
Weights do NOT need to add to 1 or 100. The formula divides by their actual total. Never drop the division when the weights are written as 20, 30, 50. For example, 60×2 + 80×3 + 70×4 = 640 ÷ 9 = 71.11, not divided by 3.
Grades and Percent Weights
A weighted average of grades is the most common use of this tool: each score is multiplied by the percent it counts for. You can use a weighted average calculator to work out your grade when different assessments count for different percentages.
For example, suppose your grades are 68 with a weight of 20, 72 with a weight of 30, and 58 with a weight of 50. The calculation is 68×20 + 72×30 + 58×50 = 64.2. The result is 64.2.
Exam and Coursework
Suppose an exam is worth 60% and coursework is worth 40%. If you score 70 on the exam and 80 on coursework, the calculation is 70×60 + 80×40 = 74. Your result is 74.
Exam Scores
To work out a weighted average of exam scores, multiply each exam score by its weight and divide by the total weight. For example, 95×0.20 + 78×0.25 + 84×0.55 = 84.7. The resulting weighted average percentage is 84.7%.
A grade calculator with percentages helps you see how each score affects the final result when weights are written as percentages. A weight calculator for grades can also check whether your weights add to 100. When the weights are percentages, they usually add to 100. The tool warns when they do not and names the missing weight. For example, if the weights add to 70%, 30% is missing. The math still divides by the actual sum, so the answer stays correct.
Do not mix different kinds of weights in the same calculation. A percentage and a count are not the same kind of weight. For example, do not put 35 meaning 35% beside 400 meaning 400 respondents as if they were the same kind of weight.
Finding a Missing Weight
Sometimes you know the target average, the scores you already have, and the value of one remaining item, but not its weight. Instead of guessing its percentage, use this weighted average calculator to solve for the missing weight from the target.
Step-by-Step Example
Suppose your target average is 80, and you have the following information:
- First value: 80, weight: 0.4
- Second value: 70, weight: 0.3
- Unknown value: 90, weight: ?
Step 1: Calculate the known weighted sum. Multiply each known value by its weight: 80×0.4 = 32 and 70×0.3 = 21. Add the products: 32 + 21 = 53. The known weighted sum is 53.
Step 2: Calculate the total known weight. 0.4 + 0.3 = 0.7.
Step 3: Set up the equation using the target average. The unknown weight must satisfy: (53 + 90×w) ÷ (0.7 + w) = 80, which gives w = 0.3. Missing weight: 0.3. The unknown value of 90 needs a weight of 0.3 to produce the target average of 80.
Understanding the Result
- Negative weight: If the solved weight is negative, no positive weight can make the remaining value reach the target.
- Larger than the other weights combined: The target is still reachable, but the unknown item will dominate the average.
- Positive and within the expected range: The result gives the weight needed to reach the target without the unknown item dominating the result.
Finding a missing weight is a distinct calculation that deserves its own mode. No other tool offers a missing-weight solve as a first-class mode.
Finding a Missing Value
When you know your current scores, their weights, and your target average, you can calculate the score needed on the remaining work. A weighted average calculator can calculate the missing score for you. The general formula is: Needed Score = (Target × Total Weight − Current Weighted Sum) ÷ Remaining Weight.
Step-by-Step Example
Suppose you want an overall average of 85 and have two completed assessments:
- First score: 80, weight: 0.2
- Second score: 90, weight: 0.3
- Remaining weight: 0.5
- Target average: 85
Step 1: Calculate your current weighted sum. 80×0.2 = 16 and 90×0.3 = 27. 16 + 27 = 43. Your current weighted sum is 43, and you have used 0.5 of the total weight.
Step 2: Calculate the score needed on the remaining work. The total weight is 1, so: Needed score = (85 − 43) ÷ 0.5 = 84. You need a score of 84 on the remaining assessment to reach an overall average of 85.
Example 2: Statistics Course Pass Mark
Suppose a statistics course has four assessment components:
| Assessment | Score | Weight |
|---|---|---|
| First assessment | 46 | 20% |
| Second assessment | 60 | 10% |
| Third assessment | 50 | 30% |
| Final exam | Unknown | 40% |
You need an overall grade of at least 60 to pass.
Step 1: Calculate the completed weighted sum. 46×0.20 = 9.2, 60×0.10 = 6, 50×0.30 = 15. 9.2 + 6 + 15 = 30.2.
Step 2: Calculate the required final exam score. (60 − 30.2) ÷ 0.4 = 74.5. You need 74.5% on the final exam to reach the overall pass mark of 60%.
Example 3: Psychology Class With Different Assessment Weights
Suppose a psychology class has three tests, a paper, a midterm, and a final exam.
| Assessment | Score | Relative weight |
|---|---|---|
| Test 1 | 85 | 1 |
| Test 2 | 84 | 1 |
| Test 3 | 74 | 1 |
| Paper | 90 | 0.5 |
| Midterm | 72 | 1.5 |
| Final exam | Unknown | 2 |
The paper counts for half the weight of a regular test, the midterm counts for 1.5 times the regular weight, and the final counts for double the regular weight.
Step 1: Calculate the completed weighted sum. 85 + 84 + 74 + (90×0.5) + (72×1.5) = 85 + 84 + 74 + 45 + 108 = 396.
Step 2: Calculate the total weight. 1 + 1 + 1 + 0.5 + 1.5 + 2 = 7.
Step 3: Calculate the final exam score needed. (80×7 − 396) ÷ 2 = (560 − 396) ÷ 2 = 164 ÷ 2 = 82. You need 82% on the final exam to reach an overall average of 80.
When Is Your Target Reachable?
- Above 100: The target is unreachable through the remaining work because the required score exceeds the maximum possible score.
- Below 0: The target is already locked in. Your existing results are sufficient to meet or exceed it, even with a score of 0 on the remaining work.
- Between 0 and 100: The target is reachable if you earn the calculated score.
For example, suppose your current average is 86, your final exam is worth 40%, and your target is 90. The calculation is (90 − 86×0.6) ÷ 0.4 = (90 − 51.6) ÷ 0.4 = 38.4 ÷ 0.4 = 96. You need 96% on the final exam to reach an overall average of 90. Since the required score is within the possible range, the target is reachable.
Combining Groups
Calculating the weighted average of two groups requires considering how many people or items belong to each group. A weighted average calculator uses the group sizes as weights, so larger groups have more influence on the combined result.
Why Averaging Two Averages Can Be Wrong
Suppose Section A has 30 students with an average score of 60, while Section B has 20 students with an average score of 50.
A simple average of the two section averages gives: (60 + 50) ÷ 2 = 55.
However, the sections have different numbers of students, so they should not contribute equally. Calculate the combined average using their student counts: (30×60 + 20×50) ÷ 50 = (1800 + 1000) ÷ 50 = 2800 ÷ 50 = 56. The correct combined average is 56, not 55.
Example 2: Combining Three Class Sections
Suppose three sections have the following average scores and student counts:
| Section | Students | Average score |
|---|---|---|
| Section A | 30 | 90 |
| Section B | 36 | 85 |
| Section C | 40 | 70 |
First, multiply each section's average by its student count: 30×90 = 2700, 36×85 = 3060, 40×70 = 2800. Add the weighted totals and divide by the total number of students: (2700 + 3060 + 2800) ÷ 106 = 8560 ÷ 106 = 80.75. The correct combined average is 80.75. Simply averaging the three section averages gives 81.67, which is incorrect because the sections have different sizes.
Example 3: Finding the Average for the Whole Class
Suppose a class has 30 students. Twelve students have an average score of 80, while the remaining 18 students have an average of 75. Calculate the combined average: (12×80 + 18×75) ÷ 30 = (960 + 1350) ÷ 30 = 2310 ÷ 30 = 77. The overall class average is 77.
When Is a Simple Average Correct?
A simple average is appropriate when both groups have equal weights. For example, suppose two semesters average 84.2 and 86.2. (84.2 + 86.2) ÷ 2 = 85.2. The combined average is 85.2. With equal weights, the simple average is the weighted average, so no adjustment is needed.
Grouped Data: Using Counts as Weights
The same method works when combining customer ratings, survey responses, or other grouped data. Suppose three stores receive the following average ratings:
| Store | Average rating | Responses |
|---|---|---|
| Store A | 4.2 | 500 |
| Store B | 3.8 | 90 |
| Store C | 4.6 | 40 |
Use the number of responses as the weight for each store: (4.2×500 + 3.8×90 + 4.6×40) ÷ 630 = (2100 + 342 + 184) ÷ 630 = 2626 ÷ 630 = 4.168. The combined rating is approximately 4.168. The simple average of the three store ratings is 4.20, which is wrong because the stores have different numbers of responses. The key rule is simple: when combining group averages, use the group sizes as weights unless every group has the same size.
Comparing Two Weighted Averages
Comparing two sets of results can help you decide which course plan, portfolio, or combination of scores is better. An average calculator with weights compares the two plans on the same terms instead of comparing raw scores.
Step-by-Step Example
Suppose you want to compare two course plans with different assessment weights.
Plan A
- First assessment: 88, weight: 0.5
- Second assessment: 78, weight: 0.5
Calculate its weighted average: 88×0.5 + 78×0.5 = 44 + 39 = 83. Plan A has a weighted average of 83.
Plan B
- First assessment: 92, weight: 0.4
- Second assessment: 85, weight: 0.3
- Third assessment: 80, weight: 0.3
Calculate its weighted average: 92×0.4 + 85×0.3 + 80×0.3 = 36.8 + 25.5 + 24 = 86.3. Plan B has a weighted average of 86.3.
Compare the results: 86.3 − 83 = 3.3. Plan B is higher by 3.3. Plan B produces the higher weighted average, even though the two plans use different numbers of assessments and different weights.
When Is Comparing Weighted Averages Useful?
Comparing weighted averages is useful when two sets of results have different weighting structures.
- Two course plans: Compare different grading structures to see which plan produces the higher overall result.
- Two portfolios: Compare investment returns while accounting for how much money is allocated to each investment.
- Two semesters: Compare semester results when courses or assessment components have different credit hours.
The comparison shows the difference between the two overall results without requiring you to calculate each part separately.
Investment Example: Comparing Portfolio Returns
Suppose an investment portfolio contains three investments:
| Investment | Amount invested | Annual return |
|---|---|---|
| Investment A | $50,000 | 12% |
| Investment B | $30,000 | 8% |
| Investment C | $20,000 | 4% |
The total investment is $100,000. Calculate the weighted return by multiplying each investment's return by its amount and dividing by the total: (50,000×12 + 30,000×8 + 20,000×4) ÷ 100,000 = (600,000 + 240,000 + 80,000) ÷ 100,000 = 920,000 ÷ 100,000 = 9.20%. The portfolio's weighted return is 9.20%.
By comparison, the simple average of the three investment returns is: (12 + 8 + 4) ÷ 3 = 8.00%. The difference occurs because the $50,000 investment carries more weight than the $30,000 and $20,000 investments, so it pulls the average toward its own return.
Weighted Averages in Real Life
A weighted average is useful whenever values contribute differently to an overall result. A weighted average calculator can help with each of these real-life examples.
1. Investment Returns
Suppose you invest $10,000 at a 6% return, $5,000 at 9%, and $15,000 at 4%. Because each investment has a different size, the weighted return is not the simple average of the three rates. The weighted return is $10,000×6% + $5,000×9% + $15,000×4%, divided by $30,000, which gives 5.5%.
2. Average Stock Purchase Price
Suppose you buy 100 shares at $42 each and another 50 shares at $48 each. Your total cost is $6,600 for 150 shares, so your average cost is $44 per share, not the simple $45. The larger purchase at the lower price pulls the average down.
3. A Farmer's Average Apple Price
A farmer sells different quantities of apples at different prices throughout the week. If the total revenue is $960.22 over 737 bushels, the weighted average price is $960.22 ÷ 737 = $1.30 per bushel.
4. Bond Duration
Suppose a portfolio contains two bonds with durations of 5 years and 10 years, and each bond represents 50% of the portfolio. The weighted average duration is 5×0.5 + 10×0.5 = 7.5 years.
Important: Averaging Speeds Is Different
Averaging speeds requires the harmonic mean, not a weighted arithmetic mean. For example, traveling at 30 mph and 60 mph over equal distances averages 40 mph, not 45 mph. This tool does not do speed averaging; the warning is here so the reader does not misuse it.
What the Calculator Does Not Solve
In version 1, this weighted average calculator does not convert letter grades to grade points (that belongs to a GPA tool), does not use a 10-point CGPA scale, does not work out a weighted median, weighted variance, or weighted geometric or harmonic mean, does not draw graphs, does not save or share results, does not offer a dedicated loan or finance mode, and does not average speeds. Grouped data is handled by entering interval midpoints as values and counts as weights.
Why Your Results May Differ
Most differences come down to a weighted average vs simple average mix-up, or to one of the traps below.
- Dividing by the count instead of the total weight: 60×2 + 80×3 + 70×4 = 640 ÷ 9 = 71.11, not divided by 3.
- Averaging averages without weighting: the two-sections example gives 56, not 55.
- Forgetting the division entirely when the weights add to 100: the sum of the products is not the average.
- Mixing scales: a percentage next to a count.
- Mismatched value and weight lists: a missing weight in the middle silently shifts every later pairing, which is why this weighted average calculator shows an error instead of computing.
- Negative weights: they can push the result outside the smallest and largest values; the tool rejects them.
Questions Students Ask While Solving
How do I work out my course grade when maths counts 50%, physics 30% and biology 20%? Use the expression 0.5×maths + 0.3×physics + 0.2×biology. For example, if maths is 80, physics is 70, and biology is 90, the calculation is 40 + 21 + 18 = 79.
What do I need on my final exam to pass? Work out the weighted sum so far, subtract it from the target times the total weight, and divide by the final exam's weight. For example, a statistics course with weights 20/10/30/40 and scores 46/60/50 needs (60 − 30.2) ÷ 0.4 = 74.5 on the final.
Can I just average the averages of two classes? No, unless the classes are the same size. Section A with 30 students averaging 60 and Section B with 20 students averaging 50 combine to (30×60 + 20×50) ÷ 50 = 56, not 55.
How do I find the missing score when I know the overall average? Rearrange the formula. For example, boys average 90, the whole class averages 92, and the ratio of boys to girls is 3:2, so the girls average (92×5 − 3×90) ÷ 2 = 95. A second example: Paper A scored 8 out of 10 with a weight ratio of 2:1 and the overall result is 70%, so Paper B scored 5 out of 10.
FAQs
These questions cover the five modes this weighted average calculator supports and the traps students meet most often.
Final Thought
Weights are what make an average honest. Multiply, add, divide by the total weight, and check the answer against the range of the values. Use this weighted average calculator to check your work, keep the traps in mind, and the next weighted average will take less time.
