Area Calculator: Find the Area of Any Shape
Finding the area of a shape is not always as simple as multiplying two measurements. A rectangle needs its length and width, a circle needs its radius, and a triangle may require its base and perpendicular height. An irregular figure can be more difficult because you may need to divide it into smaller shapes before calculating the total. Choosing the wrong measurement or formula can lead to an incorrect result, even when the arithmetic is right.
This area calculator brings 12 geometric shapes together in one tool. Select the shape, enter its required dimensions, and calculate the space it covers. Whether you are checking a geometry problem, measuring a floor, or working out the size of a plot, the formulas and examples below explain which measurements to use and how to check your result.
Area Calculator
Pick a shape, enter its measurements, and get the area with full working shown.
Rectangle
Result
Measurements are in feet, so the area starts in square feet (ft²). Pick another unit above to convert it.
Using the Area Calculator
Choose the shape you want to measure, then enter the dimensions requested by the tool. Each shape uses different measurements, so check the input labels carefully. Use consistent units for all length measurements in a calculation. If a formula requires height, enter the perpendicular height rather than a slanted side. The area calculator shows the formula and the working for every shape, so you can check each step.
Steps for Each Shape
- Rectangle: Select Rectangle and enter the length and width. The tool multiplies these measurements to calculate the area of a rectangle. It can also calculate the diagonal using the same two dimensions.
- Square: Select Square and enter the side length. All four sides are equal, so you only need one measurement to calculate the area of a square.
- Triangle: Select Triangle and enter the base and perpendicular height. The height must meet the base at a right angle. If you know all three side lengths but not the height, use the three-side method.
- Circle: Select Circle and enter the radius, which is the distance from the center to the circumference. If you have the diameter instead, divide it by two before entering the measurement.
- Trapezoid: Select Trapezoid and enter the lengths of the two parallel bases and the perpendicular height. The tool uses all three measurements to calculate the area of a trapezoid.
- Parallelogram: Select Parallelogram and enter the base and perpendicular height. The height is the shortest distance between the parallel bases, not the length of a sloping side.
- Ellipse: Select Ellipse and enter the semi-major and semi-minor axes. These measurements run from the center to the edge along the ellipse’s longer and shorter directions.
- Sector: Select Sector and enter the circle’s radius and central angle. Enter the angle in degrees when using the degree-based calculation.
- Semicircle: Select Semicircle and enter the radius. If you know the diameter, halve it to get the required radius.
- Rhombus: Select Rhombus and enter the lengths of its two diagonals. Each diagonal connects a pair of opposite corners.
- Annulus: Select Annulus and enter the outer radius and inner radius. The inner radius measures the circular opening, while the outer radius reaches the outside edge.
- L-shape: Select L-shape and enter the dimensions of the two rectangles that make up the figure. Check that the sections cover the complete shape without overlapping.
Worked Examples: Check the Calculations
These examples use the verified dimensions and results from the brief. They show how different measurements are used for different shapes. Try each example in the area calculator and compare the result with the table.
| Shape or calculation | Measurements | Result |
|---|---|---|
| Rectangle area | Length 15, width 12 | 180 |
| Rectangle diagonal | Length 15, width 12 | About 19.21 |
| Square area | Side 7 | 49 |
| Triangle area | Base 10, height 6 | 30 |
| Triangle area from three sides | Sides 13, 14, 15 | 84 |
| Circle area | Radius 5 | 78.54 |
| Trapezoid area | Parallel bases 8 and 5, height 4 | 26 |
| Parallelogram area | Base 9, height 5 | 45 |
| Ellipse area | Semi-axes 6 and 4 | 75.40 |
| Sector area | Radius 6, angle 90° | 28.27 |
| L-shaped area | Rectangle areas 10 × 6 and 4 × 3 | 72 |
| Rhombus area | Diagonals 10 and 8 | 40 |
| Annulus area | Outer radius 5, inner radius 3 | 50.27 |
A few details are important when entering measurements:
To find the area of a triangle from three sides, enter 13, 14, and 15 and use Heron’s method. It calculates the result without requiring a separate height measurement.
For a circle: Enter the radius, not the full diameter. Confusing these measurements changes the result.
For an L-shape: The two rectangles must cover the entire figure. If they overlap, their shared section would be counted twice.
For the rectangle diagonal: The diagonal is a length, not an area. Its result is expressed in the selected length unit rather than square units.
If a result looks unexpected, check the selected shape and its input measurements first. The correct formula can only produce a useful result when the dimensions are entered properly.
About Area
Area is the amount of flat, two-dimensional space enclosed by a shape. It tells you how much surface a figure covers, whether you are measuring a page, a floor, a garden, or a geometric shape.
Area is measured in square units, such as square centimeters (cm²), square meters (m²), square inches (in²), or square feet (ft²). One square unit represents a square with sides measuring one unit each. An area of 49 square units, for example, covers the same amount of space as 49 of these unit squares.
Area Is Not the Same as Perimeter
Area and perimeter describe different properties of a shape:
Area measures the space inside a shape. Its units are squared, such as cm² or m².
Perimeter measures the total distance around the outside boundary. Its units are ordinary length units, such as cm or m.
Think of a rectangular floor. Its area tells you how much floor space it covers, while its perimeter tells you the total distance around its edges. These measurements answer different questions and cannot be used interchangeably. The area calculator on this page reports area first, with perimeter alongside it where the shape has one.
How to Calculate Area
The correct area formula depends on the shape and the measurements available. Some shapes need two side measurements, while others require a radius, perpendicular height, diagonals, or an angle. The following reference table covers the formulas used for all 12 shapes in this guide. The area calculator uses the formula in the table for the shape you pick.
Formula Table
| Shape | Formula | What Each Letter Means |
|---|---|---|
| Rectangle | A = l × w | A = area, l = length, w = width |
| Square | A = s² | A = area, s = side length |
| Triangle | A = 1/2 bh | A = area, b = base, h = perpendicular height |
| Triangle using Heron’s formula | A = √[s(s-a)(s-b)(s-c)], where s = (a+b+c)/2 | A = area, a, b, c = side lengths, s = semiperimeter |
| Circle | A = πr² | A = area, π = pi, r = radius |
| Trapezoid | A = 1/2 (a+b)h | A = area, a, b = parallel base lengths, h = perpendicular height |
| Parallelogram | A = bh | A = area, b = base, h = perpendicular height |
| Ellipse | A = πab | A = area, π = pi, a = semi-major axis, b = semi-minor axis |
| Sector | A = (θ/360°) πr² | A = area, θ = central angle in degrees, r = radius |
| Semicircle | A = 1/2 πr² | A = area, π = pi, r = radius |
| Rhombus | A = 1/2 d1d2 | A = area, d1, d2 = diagonal lengths |
| Annulus | A = π(R² – r²) | A = area, π = pi, R = outer radius, r = inner radius |
| L-shape | A = A1 + A2 | A = total area, A1, A2 = areas of the two rectangular sections |
Understanding the Formulas
Rectangle: Multiply the length by the width. These measurements describe two adjacent sides of the rectangle.
Square: Multiply the side length by itself. Since all four sides are equal, one measurement is enough.
Triangle: Multiply the base by its perpendicular height, then divide by two. The height must meet the selected base at a right angle.
Triangle using Heron’s formula: This method is useful when you know all three side lengths but do not have the height. First calculate the semiperimeter, which is half the sum of the three sides, then substitute it into the formula.
Circle: Square the radius and multiply by pi. The radius is the distance from the center to the circumference.
Trapezoid: Add the lengths of the two parallel bases, multiply their sum by the perpendicular height, and divide by two. This uses the average of the parallel base lengths.
Parallelogram: The area of a parallelogram is the base times the perpendicular height. A sloping side cannot replace the height.
Ellipse: The area of an ellipse is pi times the product of its two semi-axes. Both measurements run from the center to the edge, not across the full ellipse.
Sector: The area of a sector is the central angle’s fraction of the full circle. A larger central angle represents a larger portion of the circle.
Semicircle: The area of a semicircle is half the area of the full circle, so calculate the full circle and divide by two.
Rhombus: The area of a rhombus is half the product of its two diagonals. The diagonals connect opposite corners.
Annulus: Subtract the inner radius squared from the outer radius squared, then multiply the difference by pi. This gives the area of the ring between the two circles.
L-shape: Divide the figure into two rectangles, calculate each rectangle’s area, and add the results. The sections must cover the complete figure without overlapping.
Two Common Area Calculation Traps
Entering the Diameter Instead of the Radius
The circle formula uses the radius, not the diameter. Since the diameter is twice the radius, entering the full diameter as the radius makes the calculated area four times too large. This happens because the radius is squared in the formula.
If you know the diameter, divide it by two to get the radius before calculating the area. The area calculator also accepts the diameter directly and halves it for you.
Using a Slanted Side Instead of the Triangle’s Height
The height in the triangle formula must be perpendicular to the base. A slanted side is not necessarily the height, even if it looks like the vertical measurement in a diagram.
Use the distance from the base to the opposite vertex measured at a right angle. If you only know the three side lengths, use Heron’s formula instead of estimating the height.
Area Units and Conversions
Area is expressed in square units. The unit you choose should match the size of the surface you are measuring. Square centimeters and square inches are useful for smaller objects, while square meters, square feet, and square yards are practical for larger surfaces.
An area converter lets you express the same surface in a different unit. The numerical value changes during conversion, but the actual area stays the same. You can calculate the surface first, then convert the result into a unit that is easier to understand or use. The area calculator converts the result with the unit selector, so the value changes but the area stays the same. You can also express one area as a percentage of another, for example when a room covers 40% of a floor.
Common Area Unit Conversions
The following table uses one acre as a reference and shows its equivalent in other units.
| Unit | Equivalent of 1 Acre |
|---|---|
| Square feet (sq ft) | 43,560 |
| Square meters (sq m) | 4,046.8564224 |
| Square inches (sq in) | 6,272,640 |
| Square centimeters (sq cm) | 40,468,564.224 |
| Square yards (sq yd) | 4,840 |
| Acres | 1 |
| Hectares | 0.40468564224 |
One acre = 43,560 square feet. This is a useful reference when measuring larger plots of land. To calculate area in acres, divide the measurement in square feet by 43,560.
How Square Unit Conversions Work
When converting area units, square the length conversion factor. For example, converting a length from feet to inches uses a factor of 12. For area, the factor is 12², or 144, because both dimensions are converted.
A square foot is not the same as a foot, and a square meter is not the same as a meter. Always use squared conversion factors when changing area units.
How to Find the Area of Composite and Irregular Shapes
Some figures do not match a single basic shape. An L-shaped floor, a garden with an uneven outline, or a figure with a cutout may need more than one calculation. Finding the area of irregular shapes is usually easier when you divide the outline into smaller sections that match familiar geometric formulas. This section explains how to find area when a figure does not match one shape.
The basic method is to split the figure into recognizable shapes, calculate each section separately, and combine the results. The area calculator can handle the individual shapes, while you use addition or subtraction to work out the complete figure.
Split the Figure Into Known Shapes
Look for rectangles, triangles, circles, or other recognizable sections inside the outline. You can draw imaginary lines between corners to divide the figure into smaller parts.
For example, an L-shape can be separated into two rectangles. Calculate each rectangle using its length and width, then combine the results. Measure each part with the area calculator before you add the results together.
Add the Areas of Separate Sections
When the smaller shapes do not overlap and together cover the entire figure, add their areas to get the total.
For the verified L-shaped example:
First rectangle: 10 × 6 = 60
Second rectangle: 4 × 3 = 12
Total area: 60 + 12 = 72
The two rectangles account for the complete figure, so their areas can be added.
Subtract Cutouts and Missing Sections
Not every composite figure requires addition. If a shape has an empty section inside it, calculate the larger outer area first, then subtract the area of the missing part.
An annulus is one example. It is the region between an outer circle and an inner circle. Subtracting the inner circle’s area from the outer circle’s area gives the area of the ring.
Check that you do not count an overlapping section twice or include an empty space in the total. The final result should represent only the surface you want to measure.
Why Areas Differ by Shape
Two shapes can have different areas even when some of their measurements look similar. Each formula describes how a particular shape covers space.
A rectangle uses its length and width, while a triangle uses half the product of its base and perpendicular height. A circle depends on its radius, and an ellipse depends on two semi-axis measurements. These formulas reflect the different geometry of each shape. That is why one area calculator needs a different formula for each shape.
The type of measurement also matters. A slanted side cannot replace perpendicular height in a triangle or parallelogram calculation. Similarly, a circle’s diameter cannot be entered as its radius without changing the result.
When comparing areas, check that you are using the correct formula and compatible units. A result expressed in square meters cannot be compared directly with one in square feet until both measurements are converted to the same unit. A sloped roof, for example, has a larger surface area than the flat floor beneath it, and finding its slope is a separate calculation.
Frequently Asked Questions
Final Thought
The right formula and correctly entered measurements are the keys to an accurate result. Use the area calculator above, check the shape and its dimensions, and keep your units consistent to calculate the space it covers.
